목차
1. 서론
2. 이론
3. 실험
4. 실험 결과 및 고찰
5. 결론
6. 감사
7. Nomenclatures
8. References.
본문내용
요 약
본 실험의 목적은 직관에서 발생하는 마찰 손실, 여러 부속품에 따라 발생하는 마찰 손실을 관 찰하고, 마찰계수를 측정하는 것이다. 물은 펌프, 유량계를 통해 정량적으로 공급되었다. 직관, 밸 브, 다양한 유로 (elbow, tee), 벤츄리 미터, 오리피스 미터, 피토 튜브에 압력점을 설치하여 마노미 터를 통해 압력 손실을 측정하고, 마찰 손실량을 측정하였다. 마노미터를 기록하기 전에 마노미터 내 기포를 충분히 제 거하였다. 직관, 부속품에 따라서 유체 속도에 따른 영향, Reynolds number의 영향을 확인하였다. 밸브의 경우에는 밸브 잠김 정도에 따른 영향도 확인하였다.
Abstract
The purpose of this experiment is to observe the friction loss in the straight pipe, the friction loss at various accessories, and to measure the friction coefficient. Water was supplied quantitatively through a pump and a flow meter. The friction loss is measured through the manometer by setting pressure points on the straight pipe, valves, various elbows, tees, venturi meters, orifice meters, and a Pitot tube. The bubble in the manometer is sufficiently removed before recording of pressure. Influence of fluid velocity and Reynolds number on the straight pipe and accessories were investigated. The influence of closure was also observed for the valve experiments.
참고 자료
Stokes, George (1851). "On the Effect of the Internal Friction of Fluids on the Motion of Pendulums". Transactions of the Cambridge Philosophical Society. 9: 8–106.
Streeter, V. L. (1962). Fluid Mechanics (3rd ed.). McGraw-Hill.
Shih, Merle C. Potter, Michigan State University, David C. Wiggert, Michigan State University, Bassem Ramadan, Kettering University ; with Tom I-P. (2012). Mechanics of fluids (Fourth edition. ed.). p. 105.
Warren L. McCabe, Julian C. Smith & Peter Harriot, 단위조작, 7th edition, McGraw Hill p.83-203
압축파일 내 파일목록
2018 4조 관마찰실험 실험데이터.xlsx
관에서 마찰손실.docx
새 파일 2018-10-12 20.32.47.pdf
이 자료와 함께 구매한 자료
- 고체 유동층 최소 유동화속도 및 열전달/실험레포트+데이터시트/화학공정실험/화학공학과 13페이지
- 젖은벽탑에서 수분의 물질전달, 화학공정실험, 실험레포트+데이터시트 9페이지
- 항력계수 측정실험, 화학공정실험, 실험레포트+데이터시트, 건국대학교 10페이지
- 기초실험, 기체 유량계, 열전대 검교정, Pitot tube 사용법, 화학공정실험, 실험레포트+데이.. 9페이지
- 고체의 열전도도 측정, 화학공정실험, 실험레포트+데이터시트, 12페이지