플랜트 생산 재활용 상온 혼합물의 도로 표층 적용성에 관한 기초연구
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국도로학회
ㆍ수록지정보 : 한국도로학회논문집 / 20권 / 1호
ㆍ저자명 : 최준성
ㆍ저자명 : 최준성
목차
ABSTRACT1. 서론
2. 국내·외 연구동향
3. RAP 골재의 상온 표층 적용성 검토
3.1. 연소 시험을 통한 RAP골재 입도분석
3.2. 현장 다짐시 RAP 원골재의 분리가능성 검토
4. 표층 배합설계 적용성 검토
4.1. 최적 RAP 골재 배합비 검증
4.2. RAP 40% 혼합 비율의 최적함수비 결정
4.3. 양생방법 비교분석
4.4. 플랜트 생산을 위한 골재 배합비 제안
5. 결론
REFERENCES
영어 초록
PURPOSES: This study determined the optimal usage rate of RAP (reclaimed asphalt pavement) using cold central-plant recycling (CCPR) on a road-surface layer. In addition, a mixture-aggregate gradation design and a curing method based on the proposed rate for the surface-layer mix design were proposed.METHODS: First, current research trends were investigated by analyzing the optimum moisture content, mix design, and quality standards for surface layers in Korea and abroad. To analyze the aggregate characteristics of the RAP, its aggregate-size characteristics were analyzed through the combustion asphalt content test and the aggregate sieve analysis test. Moreover, aggregate-segregation experiments were performed to examine the possibility of RAP aggregate segregation from field compaction and vehicle traffic. After confirming the RAP quality standards, coarse aggregate and fine aggregate, aggregate-gradation design and quality tests were conducted for mixtures with 40% and 50% RAP usage. The optimum moisture content of the surface-layer mixture containing RAP was tested, as was the evapotranspiration effect on the surface-layer mixture of the optimum moisture content.
RESULTS: After analyzing the RAP recycled aggregate size and extraction aggregate size, 13-8mm aggregate was found to be mostly 8mm aggregate after combustion. After using surface-chipping and mixing methods to examine the possibility of RAP aggregate segregation, it was found that the mixing method contributed very little for 3.32%, and because the surface-chipping method applied compaction energy directly as the maximum assumption the separation ratio was 15.46%. However, the composite aggregate gradation did not change. Using a 40% RAP aggregate rate on the surface-layer mixture for cold central-plant recycling satisfied the Abroad quality standard. The optimum moisture content of the surface-layer mixture was found to be 7.9% using the modified Marshall compaction test. It was found that the mixture was over 90% cured after curing at 60℃ for two days.
CONCLUSIONS : To use the cold central-plant recycling mixture on a road-surface layer, a mixture-aggregate gradation design was proposed as the RAP recycled aggregate size without considering aggregate segregation, and the RAP optimal usage rate was 40%. In addition, the modified Marshall compaction test was used to determine the optimum moisture content as a mix-design parameter, and the curing method was adapted using the method recommended by Asphalt Recycling & Reclaiming Association (ARRA).
참고 자료
없음태그
"한국도로학회논문집"의 다른 논문
덧씌우기 응력흡수층에 대한 전단, 부착강도 평가 및 파괴에너지 예측모델 개발9페이지
아스팔트 긴급보수용 스프레이 패칭 장비 개발 및 현장 적용성 평가9페이지
밀도와 흡수율을 고려한 제강슬래그 아스팔트 콘크리트의 배합설계 방법 연구9페이지
상온 재활용 아스팔트 혼합물의 적정 유화아스팔트 함량 선정 연구12페이지
재난 강도에 따른 도로 네트워크의 성능 및 회복력 산정 방안11페이지
무기질 첨가제를 사용한 상온 재활용 아스팔트 혼합물의 공용성 평가7페이지
불포화 사질토의 도로함몰 특성에 관한 실험적 연구7페이지
수치해석적 기법을 활용한 골재 도로의 콜루게이션 발생 및 진전 분석10페이지
성능보증제도를 적용한 일반국도 유지보수공사 시범사업8페이지
교통안전사업 유형별 평가항목의 가중치 특성분석10페이지