PRC연속보 최적설계에서 단면의 유효깊이 변화를 고려한 DCOC알고리즘 개발
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국전산구조공학회
ㆍ수록지정보 : 한국전산구조공학회 논문집 / 15권 / 2호
ㆍ저자명 : 조홍동, 한상훈
ㆍ저자명 : 조홍동, 한상훈
한국어 초록
본 연구에서는 직사각형 단면을 갖는 프리스트레스 철근콘크리트보(PRC)의 최소경비설계를 수행하였다. 목적함수로서 건설경비는 콘크리트 경비, 긴장재 경비, 철근 경비 그리고 거푸집 경비를 포함하였으며 이를 최소화하였다. 설계제약조건으로는 시방서상의 최대처짐제약, 휨 및 전단강도제약, 연성제약 그리고 설계변수에 대한 상하한 제약을 고려하였다. 쿤-터커 필요조건을 이용하여 최적성 규준을 설계변수의 항으로 명시적으로 유도하였으며, 이때 설계변수로는 보의 유효깊이, 긴장재의 최대편심거리 그리고 철근비로 취하였고, 긴장재의 형상은 2차 포물선함수로 가정하였다. 또한 본 연구에서는 요소별로 변화하는 단면을 갖는 경우와 전경간에 걸쳐 일정한 단면을 갖는 경우에 대하여 고려하였고, 긴장재의 경간별 최대편심을 설계변수화 하였다. 그리고 수치예를 들어 개발된 기법의 적용성과 효율성을 보였다.영어 초록
This paper describes the minimum cost design of prestressed reinforced concrete (PRC) hem with rectangular section. The cost of construction as objective function which includes the costs of concrete, prestressing steel, non prestressing steel, and formwork is minimized. The design constraints include limits on the minimum deflection, flexural and shear strengths, in addition to ductility requirements, and upper-Lower bounds on design variables as stipulated by the specification. The optimization is carried out using the methods based on discretized continuum-type optimality criteria(DCOC). Based on Kuhn-Tucker necessary conditions, the optimality criteria are explicitly derived in terms of the design variables - effective depth, eccentricity of prestressing steel and non prestressing steel ratio. The prestressing profile is prescribed by parabolic functions. In this paper the effective depth is considered to be freely-varying and one uniform for the entire multispan beam respectively. Also the maximum eccentricity of prestressing force is considered in every span. In order to show the applicability and efficiency of the derived algorithm, several numerical examples of PRC continuous beams are solved.참고 자료
없음태그
"한국전산구조공학회 논문집"의 다른 논문
- 단부 철근콘크리트 중앙부 철골조로 이루어진 혼합구조부의 비선형 이력거동9페이지
- 두 개의 매개변수로 표현되는 탄성지반 위에 놓인 낮은 아치의 최저차 대칭 및 역대칭 고유진동수11페이지
- 개구부가 있는 고층 벽식 구조물의 효율적인 3차원 해석15페이지
- 유한차분 시간영역법을 이용한 콘크리트 두께측정 전자파 모델링의 적용9페이지
- 성능목표를 달성하기 위한 점탄성 감쇠기의 설계11페이지
- 패널영역의 변형을 고려한 강뼈대 구조물의 이산화 최적설계13페이지
- 재시동 조건을 이용한 유전자 알고리즘의 성능향상에 관한 연구9페이지
- 경기장 관람석의 효율적인 진동해석11페이지
- 횡강성 영향행렬을 이용한 고층건물의 횡변위 제어 및 단면 재산정 방안9페이지
- 다단계 신경망을 이용한 초기 구조설계 시스템 개발10페이지