도로함몰 위험도 평가를 위한 실대형 포장가속시험 기초 연구
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국도로학회
ㆍ수록지정보 : 한국도로학회논문집 / 18권 / 5호
ㆍ저자명 : 박희문, 김연태, 최지영, 김기현
ㆍ저자명 : 박희문, 김연태, 최지영, 김기현
목차
1. 서론2. 테스트베드 구축
3. 동공생성 평가를 위한 시험
3.1. 내시경 조사
3.2. GPR 시험
3.3. FWD 시험
4. 포장가속시험 수행
4.1. 포장가속시험장비 소개
4.2. 응력 및 변형률 테스트
4.3. 포장가속시험 결과
5. 결론
REFERENCES
영어 초록
PURPOSES : The objective of this study is to evaluate the effect of size and depth of cavities on the pavement failure using the full-scale accelerated pavement testing.METHODS: A full-scale testbed was constructed by installing the artificial cavities at a depth of 0.3 m and 0.7 m from the pavement surface for accelerated pavement testing. The cavities were made of ice with a dimension of 0.5 m*0.5 m*0.3 m, and the thickness of asphalt and base layer were 0.2 m and 0.3 m, respectively. The ground penetrating radar and endoscope testing were conducted to determine the shape and location of cavities. The falling weight deflectometer testing was also performed on the cavity and intact sections to estimate the difference of structural capacity between the two sections. A wheel loading of 80 kN was applied on the pavement section with a speed of 10 km/h in accelerated pavement testing. The permanent deformation was measured periodically at a given number of repetitions. The correlation between the depth and size of cavities and pavement failure was investigated using the accelerated pavement testing results.
RESULTS : It is found from FWD testing that the center deflection of cavity section is 10% greater than that of the intact section, indicating the 25% reduction of modulus in subbase layer due to the occurrence of the cavity. The measured permanent deformation of the intact section is approximately 10 mm at 90,000 load repetitions. However, for a cavity section of 0.7 m depth, a permanent deformation of 30 mm was measured at 90,000 load repetitions, which is three times greater than that of the intact section. At cavity section of 0.3 m, the permanent deformation reached up to approximately 90 mm and an elliptical hole occurred at pavement surface after testing.
CONCLUSIONS : This study is aimed at determining the pavement failure mechanism due to the occurrence of cavities under the pavement using accelerated pavement testing. In the future, the accelerated pavement testing will be conducted at a pavement section with different depths and sizes of cavities. Test results will be utilized to establish the criteria of risk in road collapse based on the various conditions.
참고 자료
없음"한국도로학회논문집"의 다른 논문
비교그룹방법을 통한 백색 중앙분리대측 실선 도입의 사고감소효과 연구8페이지
의사결정나무를 활용한 업종별 버스 교통사고 특성 연구11페이지
레이더검지기의 차량궤적 정보기반의 고속도로 밀도산출방법에 관한 비교9페이지
비보호좌회전에서의 간격수락 행태모형 개발9페이지
고속철도는 고속도로에 비하여 저탄소 친환경적인가?11페이지
조건부 가치측정법을 이용한 고속도로 졸음운전 교통사고 예방 캠페인 편익 추정8페이지
신호교차로에서 무인교통단속 규제에 따른 주행 특성11페이지
도심지 내 복층 저소음포장 설치에 따른 소음저감 사례연구8페이지
개별요소법을 활용한 도로하부 동공 상태 평가9페이지
저소음 포장도로 시공에 따른 방음벽 높이 저감효과 예측7페이지