온도변화에 따른 ETFE 막재의 재료특성 연구
(주)코리아스칼라
- 최초 등록일
- 2016.04.02
- 최종 저작일
- 2011.09
- 9페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국공간구조학회
ㆍ수록지정보 : 한국공간구조학회지 / 11권 / 3호
ㆍ저자명 : 김영호, 김재열
한국어 초록
ETFE막재는 PTFE막재에 비해 상대적으로 두께가 매우 얇고 유연하기 때문에 다양한 온도환경에 따른 막재의 재료특성을 알아볼 필요가 있다. 본 논문에서는 ETFE 막재에 대해 다양한 온도하에서의 재료특성 실험을 수행하였다. 첫째로, -2℃, 0℃, +20℃, +40℃ 하에서 각각 5 시험편을 이용하여 인장실험을 수행하였으며, 각 온도하에서의 항복응력, 인장강도, 영계수를 도출하였다. 두 번째는, 25℃, 40℃, 60℃ 하에서 각각 3MP, 6MP, 9MP의 하중을 가하여 각 온도에 따른 크리프 변형도를 알아보았다. 마지막으로, -15℃, 0℃, 20℃ 하에서의 인열강도 시험을 수행하였다. 시험결과분석에 따르면, ETFE막재의 전제적인 거동은 크게 변하지 않았으나, 재료특생은 온도의 영향을 받고 있음을 알 수 있었다.
영어 초록
It is needed to investigate the material properties of ETFE foil under various temperatures because ETFE membrane foils have very thin depth and relatively high flexibility. In this paper, the material properties of ETFE membrane foil obtained from 3 testes under various temperatures are presented. First, the uniaxial test under four temperatures as -20℃, 0℃, +20℃ and +40℃ was performed. Each 5 specimen was tested and the yield stress, tensile strength and the Young's modulus of the foils are obtained. Second, the creep testes under three temperatures as 25℃, 40℃ and 60℃, 3MP, 6MP and 9MP tension load was subjected to the specimen and the creep characteristics was investigated. Finally, the tear test under 5℃, 0℃ and 20℃ was performed. It is concluded that the shape of stress-strain curve or general behaviors are similar with that of normal temperatures but the mechanical characteristics of ETFE membrane foils were affected by the temperatures, obviously.
참고 자료
없음
"한국공간구조학회지"의 다른 논문
더보기 (2/7)